Vicious Mustang: An American Icon At Ultrace


The variety of abroad guests Ultrace attracts exhibits how huge this annual European occasion has turn out to be. But it surely’s not simply individuals making the journey to Wrocław, Poland – it’s automobiles too.

On the latest 2024 occasion one worldwide construct stood out to me above all others: Chris Marechal’s Ford Mustang from the USA.

HAZ03806-Edit

Constructed by Timeless Kustoms in Camarillo, California, the Vicious Mustang is definitely extra {custom} than it’s Ford. In actual fact, the one components from the bottom 1965 Mustang coupe that stay are the A-pillars and the cowling; all the things else is {custom} or aftermarket. ‘Bonkers’ doesn’t even start to explain this one-off creation that seemingly value over US$1M to construct.

HAZ03800-Edit

The outside is offered in Vicious Black – a {custom} coloration combined by PPG – with silver and pink stripes to interrupt it up. The hood is a one-off {custom} carbon fiber piece that weighs simply eight kilos. My favourite element? The Ferrari F430-inspired rear diffuser.

HAZ03835-Edit

I met Chris, who was glad to point out me round his automobile. Though not earlier than letting the Ultrace crowd hear the way it sounds.

I’m all the time fascinated by how shortly individuals encompass a automobile when it’s about to be fired up. On this case, although, I can completely perceive it.

HAZ03807-Edit

Beneath the hood is a 5.1L Ford Efficiency Aluminator V8 engine that produces 1,003whp and 784ft-lb of torque on E85 gas – with simply 70% throttle.

HAZ03821-Edit

These spectacular numbers are because of a Magnuson MP2300 TVS supercharger and twin Precision 6466 ball-bearing turbos. That’s proper, this factor is compound-boosted.

HAZ03839-Edit

The turbos – hidden contained in the entrance fenders – override the supercharger by way of piping that runs into the air-to-air intercoolers up entrance after which again below the automobile into the supercharger. For the reason that hood is provided with a duct, as soon as the air passes by way of the front-mounted intercooler and radiator setup, it creates some downforce to enhance the Mustang’s dealing with.

HAZ03803-Edit

Backing up the Aluminator engine is an EMCO CG46 sequential 6-speed transmission with a {custom} Centerforce DYAD clutch, operating out to a Unusual Engineering 9.75-inch aluminum rear finish.

HAZ03826-Edit

You would possibly suppose the 2 holes beside the headlights are there to feed the turbos with air. In actual fact, they’re cooling ducts for the entrance brakes, which include Brembo 6-piston calipers and 15.5-inch carbon-ceramic rotors. Brembo 4-pot calipers function on the rear.

HAZ03844-Edit

The wheels are center-lock Forgeline CF3C-SLs – 19×11-inch on the entrance and 19×13-inch out again, with 305/30ZR19 and 355/30ZR19 tires respectively. Regardless of the big entrance wheel and tire combo, the Mustang has no drawback turning from lock to lock.

HAZ03799-Edit

The suspension consists of Ridetech triple-adjustable coilovers with the entrance finish benefitting from an entire Artwork Morrison C7 Corvette body clip. On the rear, the Mustang sports activities a multi-link unbiased rear suspension association additionally manufactured by Artwork Morrison.

HAZ03842-Edit

The pink detailing seen within the engine bay, across the bodywork, and on the Brembo calipers tie proper into the {custom} cabin.

HAZ03815-Edit
HAZ03812-Edit

The all-red inside is function-focused however completed with an exacting consideration to element. Nestled inside a 14-point roll cage, custom-trimmed Sparco Professional 2000 seats are paired with Crow Security Gear 5-point harnesses. All the pieces you want to swap on or off and take a look at is correct in entrance of you and below the MoTeC C127 coloration show. A Classic Air warmth/defrost system and DJ Security fireplace suppression system elevate the spec additional.

HAZ03814-Edit

A {custom} gas cell takes up a lot of the trunk area, however there’s nonetheless room for the gas provide system and Viair air tank and compressor for the paddle shifter actuation.

HAZ03830-Edit

To people who reside within the US, this automobile is previous information. VSTANG been across the scene for a couple of years now – not that you simply’d know by it – and has attended the SEMA Present a minimum of 3 times. For us Europeans, nevertheless, seeing one thing of this caliber is a really particular deal with.

Ultrace all the time brings out one of the best; it’s only a disgrace that all of us want to attend a full yr for the following occasion.

Alen Haseta
Instagram: hazetaa

Chris Marechal’s Vicious Stang

Engine: Ford Efficiency 5.2L Aluminator V8, 2x Precision 6466 ball-bearing turbochargers, Magnuson MP2300 TVS supercharger, GT350 CNC-ported heads, {custom} Darton Mid 3.700 Large Bore Sleeve Equipment, Ford Efficiency Coyote Boss 302 cast crankshaft, Comp Cams {custom} Voodoo Head camshafts with MMR billet cam Adjusters & guides, Manley Efficiency {custom} 2618 pistons, Manley Efficiency Professional Sequence I-Beam 300M connecting rods, Manley valve springs, {custom} MMR titanium retainers, ARP predominant/head studs, Cometic head & exhaust Gaskets, Aviaid 4-stage dry sump with billet oil pan, XRP oil traces, gas traces & fittings, {custom} exhaust by Timeless Kustoms with MagnaFlow parts, {custom} stainless-steel long-tube headers by Timeless Kustoms with MagnaFlow parts and DEI warmth wrap, 2x {custom} Fluidyne intercoolers, {custom} Fluidyne radiator, 2x Aeromotive Eliminator Stealth in-tank gas pumps, Aeromotive gas stress regulator, MoTeC ECU & information acquisition system with GCU, trunk-mounted Optima battery

Drivetrain: EMCO CG46 sequential 6-speed gearbox with paddle shifters, {custom} Centerforce DYAD clutch, Unusual Engineering unbiased 9.75 aluminum rear finish

Suspension & Brakes: Ridetech triple-adjustable coilovers, entrance: C7 Corvette clip manufactured by Artwork Morrison Enterprises, rear: multi-link unbiased rear suspension (IRS) manufactured by Artwork Morrison Enterprises, Brembo 15.5-inch carbon-ceramic rotors, Brembo 6-piston entrance calipers, Brembo 4-piston rear calipers

Wheels & Tires: Forgeline GT3C center-lock 19×11-inch entrance & 19×13-inch rear wheels, Kumho Ecsta V720 305/30ZR19 entrance & 355/30ZR19 rear tires

Exterior: Dynacorn physique panel shells, mini tubs with 2-inch {custom} fender flares by Timeless Kustoms, Ringbrothers billet hood hinges, Ferrari F430-inspired rear diffuser by Timeless Kustoms

Inside: Sparco Professional 2000 seats, Crow harnesses, DJ Security fireplace suppression system, MoTeC C127 sprint, Classic Air air con





Supply hyperlink

Leave a Reply

Your email address will not be published. Required fields are marked *